Introduction
Congratulations upon your selection of the QV-100 Liquid Crystal
Digital Camera. The QV-100 comes with its own built-in liquid crystal
color monitor that let’s you instantly view the pictures you take.
Liquid Crystal Digital Camera
QV-100
To get the most out of the QV-100, be sure to carefully read this
manual and follow the instructions contained in it.
Owner’s Manual
英
2
Contents
Using Auto Play .................................................................. 38
Protecting Memory Pages .................................................. 41
Unprotecting Memory Pages .............................................. 43
Hiding Protected Memory Pages ........................................ 45
Precautions .......................................................... 5
Unpacking............................................................. 9
General Guide .................................................... 10
Top and Display .................................................................. 10
Lens .................................................................................... 10
Bottom ................................................................................ 11
Terminals ............................................................................ 11
Deleting Memory Pages .................................... 46
Deleting Images From Memory .......................................... 46
Resolution Conversion...................................... 50
Connecting to Other Devices............................ 51
Power Supply ..................................................... 13
To load batteries ................................................................. 13
Using AC Power ................................................................. 17
The camera terminals ......................................................... 51
Using the Camera with a Connected Device ... 52
Troubleshooting................................................. 59
Specifications..................................................... 65
About the camera’s backlight… ....................... 66
Recording Images .............................................. 19
To record an image ............................................................. 19
How to avoid hand movement… ......................................... 21
Fluorescent Lighting ........................................................... 21
Infrared Light ....................................................................... 22
Shooting Images Outdoors ................................................. 22
Changing the Lens Orientation ........................................... 22
NORMAL/MACRO Switch .................................................. 24
Resolution Modes ............................................................... 24
Exposure Adjustment .......................................................... 25
Changing the Aperture Setting ........................................... 26
Record Mode Displays ........................................................ 27
Using the Self-Timer ........................................................... 30
• CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss resulting from the use of this manual.
• CASIO COMPUTER CO., LTD. assumes no responsibility for any
loss or claims by third parties which may arise through the use of
the QV-100.
Playing Back Images ......................................... 31
Displaying Images on the Camera’s LCD ........................... 31
Displaying Images on a TV Screen .................................... 32
Page Status Indicators ........................................................ 33
Producing a Multi-Page Display .......................................... 34
Using the Zoom Function .................................................... 36
• CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss caused by deletion of data as a result of malfunc-
tion, repairs, or battery replacement. Be sure to back up all impor-
tant data on other media to protect against its loss.
3
4
Unpacking
General Guide
Check to make sure that all of the items shown below are included
with your camera. If something is missing, contact your dealer as
soon as possible.
The following illustrations show the names of each component, but-
ton and switch on the camera.
Top and Display
F
F
R
E
/ O
DISP (Display) button
N
MODE button
W
O
O
P
/PROTECT
(Timer/Protect)
button
E
D
O
L
E
M
D
P
I S
D
T
C
E
F
F
E
T
C
E
DEL (Delete) button
T
O
R
P
L
A
M
O
N
Shutter button
O
R
C
A
M
Soft case
[+] (Forward)
button
Camera
EFFECT button
Alkaline batteries (AA-size × 4)
[–] (Reverse)
button
LCD
POWER switch
Function switch
Cleaning Cloth
Lens
Manual
NORMAL/MACRO switch
Wrist Strap
Video cable
Lens
Aperture switch
9
10
General Guide
Tripod hole
Getting Acquainted
Connecting the Wrist Strap
Bottom
Pass the wrist strap through the hole on
the side of the camera as shown in the
illustration.
Battery
compartment
lock
2
1
Battery compartment cover
BRIGHT (brightness) control
• BRIGHT control adjusts the brightness of the image on the LCD.
The brightness is set at the factory to the optimum setting, and nor-
mally does not need adjustment.
Using the Cleaning Cloth
Terminals
Terminal panel cover
Use the cleaning cloth to wipe finger-
prints and smudges from the LCD and
lens.
F
F
R
O
/
E
N
W
O
O
P
VIDEO OUT terminal
L
E
D
• Be sure to avoid applying too much
pressure when wiping the LCD. Too
much pressure can cause permanent
discoloration, abnormal images, and
cracks.
DIGITAL terminal
L
A
M
O
N
O
R
C
A
M
AC Power terminal
Using the Soft Case
Opening the Terminal Panel Cover
L
E
D
Keep the camera in its soft case to pro-
tect it when not in use.
R
E
W
FF
O
P
E
N
/O
D
O
O
M
P
IS
D
2
3
1
E
E
D
L
E
D
O
D
L
O
E L
M
E
M
D
D
P
P
I S
I S
D
D
T
T
C
E C
F F
E
F
F
E
E
T
T
C
C
E
T E
T
O
O
R
P
R
P
Important!
Make sure that the terminal panel cover is slid fully away as shown in
step 2 above before trying to raise it. Forcing the cover up can seri-
ously damage it.
11
12
Power Supply
Getting Acquainted
The camera features a two-way power supply that lets you use either
batteries (AA-size Alkaline or Lithium) or household AC current.
Battery Handling Precautions
Incorrect use or handling of batteries can cause them to leak or burst
and seriously damage your camera. Be sure to note the following
important precautions to avoid problems with batteries.
To load batteries
Be sure that camera power is turned off whenever loading or replac-
ing batteries.
• Use only LR6 (AM-3) type alkaline or
FR6 type lithium dry cell batteries
with this camera. Never mix old bat-
teries with new ones. Failure to do so
can result in bursting or leaking of
batteries, creating the danger of fire
or personal injury.
2
1. Slide the battery compartment
lock on the bottom of the camera
in the direction indicated by arrow
1, and swing open the battery
compartment cover as indicated
by arrow 2.
1
• Always make sure that the positive
Caution
[+] and negative [–] ends of the bat-
teries are facing correctly, as noted
by the markings on the camera itself.
Improper loading of batteries can re-
sult in bursting or leaking of batteries,
creating the danger of personal injury
or soiling of objects nearby.
2. Insert four batteries and close the
battery compartment cover.
A
• Remove batteries from the camera if you do not plan to use it for
more than two weeks.
• Never recharge batteries, never allow direct connection between
two ends of a battery, and never try to take batteries apart.
Be sure to use Alkaline or Lithium batteries. Never use
manganese batteries (see precautions on the next page).
• Do not expose batteries to direct heat or dispose of them by burn-
ing. Doing so can create the danger of explosion.
•
Make sure that the positive + and negative - ends of the
• Never mix batteries of different types.
batteries are facing correctly.
•
Press down on the battery compartment cover at the point
marked A in the above illustration until the cover locks into
place with a click.
13
14
Power Supply
Getting Acquainted
• Dead batteries are susceptible to leakage, which can cause serious
damage to your camera. Remove batteries from the camera as
soon as you notice they are dead.
Flash Memory
The camera features flash memory for storage of images. Flash
memory does not require electrical power to store data, so image
data is retained in memory even when you turn camera power off. If
batteries go dead, simply load a set of new batteries or connect the
AC adaptor and you will be able to view images in camera memory.
• The batteries that power this camera normally become warm when
they lose power. This does not indicate malfunction.
Standard Battery Life
Auto Power Off
The following shows standard battery life of batteries when the cam-
era is used without interruption under normal temperatures. Lower
temperatures can cause shortening of the standard battery life.
Power automatically turns off whenever you do not perform any cam-
era operation for a period of time. Power turns off after about two
minutes in the Record Mode or after about five minutes in the Play-
back Mode.
LR6 (AM3) AA-size alkaline batteries
Approximately 150 minutes continuous operation
Recording for about 96 images (one image per minute)
FR6 AA-size lithium batteries
• To restore power, simply slide the POWER switch to the right as
you normally do.
POWER
ON/OFF
Approximately 240 minutes continuous operation
Recording for about 180 images (one image per minute)
Low Battery Indicator
A low battery indicator (
) appears on the LCD whenever remain-
Important!
ing battery power drops below a certain level.
The Auto Power Off function does not operate under the following
conditions.
When this indicator appears, replace all four batteries with a fresh set
of new ones. Once the low battery indicator appears, you can expect
only about 10 more minutes (alkaline batteries) of operation before
total power failure.
• During Auto Play (page 38)
• When operations are being performed on a computer connected to
the camera via the camera’s DIGITAL terminal.
• Whenever the AC adaptor is connected to the camera.
15
16
Power Supply
Getting Acquainted
• Always be sure to use the AD-C60
AC adaptor only. Using any other AC
adaptor can cause damage to the
camera not covered by the warranty.
Using AC Power
To power the camera from standard AC power, use the optional AC
adaptor (AD-C60).
• When unplugging the AC adaptor
from the wall socket, be sure to
grasp the adaptor (not the cord).
AC power terminal
AC adaptor
Caution
• Avoid an undue bending, pulling,
and twisting of the AC adaptor's
cord, and never try to lengthen the
cord by splicing it with other wire.
F
F
R
/ O
E
N
W
O
O
P
L
E
D
L
A
M
O
N
O
R
C
A
M
AC outlet
• Be sure to switch power off before connecting or disconnecting the
adaptor.
• Always turn camera power off before disconnecting the AC adaptor,
even if the camera has batteries installed. If you don't, the camera
will turn off automatically when you disconnect the AC adaptor.
Even so, you run the risk of damaging the camera whenever you
disconnect the AC adaptor without first turning power off.
AC Adaptor precautions
• Never use an electrical outlet whose
voltage is outside the rating marked
on the camera. Doing so can create
the danger of fire or electrical shock.
Use only the optional AC adaptor
specified for this camera.
• The AC adaptor may become warm to the touch after extended pe-
riods of use. This is normal and is not cause for alarm.
• After use turn off the power switch of the camera and unplug adap-
tor from the AC outlet.
Caution
• Should the cord of the AC adaptor
become damaged (exposed internal
wiring or shorts), request a replace-
ment from an authorized CASIO
service provider. A damaged AC
adaptor cord creates the danger of
fire or electrical shock.
17
18
Recording Images
Operation
The following procedure provides the basic steps for recording an
image.
4. Use MODE to enter the resolution mode (FINE or NORMAL)
you want.
•
Each press of MODE toggles between the Normal Mode
and Fine Mode.
To record an image
REC
1. Enter the Record Mode.
•
Note that the number of images that can be stored in
memory is different depending on whether images are
saved in the Normal Mode or Fine Mode. See “Resolution
Modes” on page 24 for details.
PLAY
•
Slide the function switch to the
REC position.
2. Turn on the camera.
5. Record the image.
•
Slide the POWER switch in the di-
REC
PLAY
rection indicated by the arrow.
•
Compose the image you want to
POWER
ON/OFF
LCD
DIGITAL CAMERA
QV-100
record while viewing it on the
LCD.
•
The POWER switch automatically
slides back to its original position
when you release it.
•
•
•
It is best to look at the LCD di-
rectly, and not from an angle.
•
•
When power comes on, the image of the object that is in
front of the camera’s lens appears on the LCD.
Take care that your finger is not
blocking the lens.
You can perform steps 1 and 2 in either order (1 then 2, or 2
then 1).
Should the lens become dirty, use
the cloth that comes with the cam-
era to clean it off.
3. Set the NORMAL/MACRO switch to the NORMAL position.
•
If the object whose image you are
recording is about 15 centimeters
from the lens (about 6 inches), set
the NORMAL/MACRO switch to
MACRO. See page 24 for details
on using this switch.
NOMAL
•
•
When the image is situated on the LCD as you want it, press
the shutter button.
MACRO
Press the shutter button lightly to avoid moving the camera.
See page 21 for information on how to avoid hand move-
ment.
•
The message “WAIT” appears on the LCD for about six sec-
onds along with the image that was recorded when you
pressed the shutter button. You can use the camera to take
the next picture after the “WAIT” message disappears.
Note
• The camera is designed to refresh the image on the LCD about
seven times per second. Because of this, you may experience a
feeling of jerkiness in the changing image if you move the camera
quickly. This is normal and does not indicate malfunction.
•
Here you could change the function switch to the PLAY posi-
tion and view the image you just recorded.
19
20
Recording Images
Operation
Caution
Infrared Light
• Never open the battery compartment cover, disconnect the
AC adaptor from the camera or unplug it from the wall
socket while the “WAIT” message is on the LCD. Doing so
will not only make storage of the current image impossible, it
can also corrupt other image data already stored in camera
memory.
Infrared light generated by a flash or other source can create image
color problems, such as red areas being recorded as green. Such
color problems will show up in the LCD while you are composing the
image.
Shooting Images Outdoors
Strong direct or reflected sunlight can cause recorded images to take
on a greenish tinge. This is due to the characteristics of the camera’s
charge-coupled device (CCD), and it does not indicate malfunction of
the camera. One way you can try to minimize this problem is to set
the aperture to [●] (F8).
How to avoid hand movement…
Any hand movement when you press the shutter button can causes
blurring of the recorded image. Note the following points on avoiding
hand movement.
• Make sure there is no excessive movement of the image of the ob-
ject on the LCD.
• Use a tripod whenever possible when recording images in dim light-
ing. The camera automatically adjusts shutter speed in accordance
with the brightness of the object whose image is being recorded.
Shutter speed is quite slow for dimly lit objects, increasing the pos-
sibility of blurring caused by hand movement.
Changing the Lens Orientation
The lens of the camera is built into a lens body that is designed to
rotate. This means you can change the angle of the lens without mov-
ing the rest of the camera.
Fluorescent Lighting
Fluorescent lighting actually flickers at a frequency that cannot be
detected by the human eye. When using the camera indoors under
such lighting, you may experience some brightness or color problems
with recorded images. The actual extent of the problems depends on
what cycle of the fluorescent light’s flicker is occurring when the cam-
era’s shutter actually releases. For best results, use a commercially
available video lights.
Rotates up to 90°
towards the front
Rotates up to 180°
towards the back
21
22
Recording Images
Operation
• Any images recorded while the lens body is rotated so the lens is
pointed from the back of the camera are stored as mirror images of
the image that appears in the LCD before the shutter button is
pressed.
NORMAL/MACRO Switch
The NORMAL/MACRO switch tells the camera
how much distance there will be between the
lens and the object whose image you are record-
ing. The following table describes the conditions
covered by each switch setting.
NOMAL
MACRO
PR
O
TE
CT
EF
FE
CT
DI
SP
DE
L
M
O
DE
PO
OFF
O
WE
R
N/
R
E
NORMAL
MACRO
C
Switch position
0.5 meters to ∞
For portraits taken
indoors
14 to 18 cm
For close ups taken
indoors
Aperture F2.8(○)
A
0.3 meters to ∞
11 to 27 cm
F8 (●)
For general outdoor For outdoor close-ups
images
.......
.......
A
B
LCD when shutter button is
pressed (in the Record Mode)
* See page 26 for details on how to change the aperture.
LCD when image is played
back from camera memory
B
Resolution Modes
In addition to a Normal Mode, this camera also has a Fine Mode for
saving images using higher resolution. Use the MODE button to
switch between the Normal Mode and Fine Mode.
The following table shows how many images can be stored in
memory using each resolution mode.
Important!
• Do not apply excessive force when rotating the lens body. Doing so
can cause serious damage to the lens.
Resolution
Mode
Indicator
Number of Images
• Do not carry the camera or move it around while holding onto only
the lens body.
64 (approximately 480-kbit com-
pressed)
FINE
• Return the lens body to its normal position (with the lens pointing
from the front of the camera) before storing the camera.
192 (approximately 160-kbit com-
pressed)
NORMAL
• You can switch between resolution modes at any time before re-
cording an image.
23
24
Recording Images
Operation
Notes
Exposure Adjustment
• Exposure adjustment is generally expressed in terms of an expo-
sure adjustment value. The exposure adjustment value is always
set to zero whenever you turn on the camera.
This camera features an automatic exposure (AE) function that auto-
matically changes the shutter speed in accordance with lighting. In
addition, you can also manually adjust the exposure to compensate
for backlighting, indirect indoor lighting, dark backgrounds, and other
special conditions.
• The exposure adjustment value is changed by 0.25 with each press
of [+] or [–]. The range of the value is -2 to +2.
• The exposure adjustment value automatically reverts to zero when-
ever the shutter button is pressed. You can manually reset the ex-
posure adjustment value by using [+] and [–] to change the value
back to zero, which is indicated when the +/– indicator disappears
from the monitor.
To manually adjust the exposure
1. Enter the Record Mode.
•
Set the function switch to the REC position.
2. Use the [+] and [–] buttons to manually adjust the exposure.
Important!
•
•
Pressing [+] makes the image on the LCD brighter. Use it to
adjust for dim indoor lighting and backlighting.
• When the exposure adjustment is too bright or too dark, you may
not be able to adjust within the range of -2EV to +2EV.
Pressing [–] makes the image on the LCD darker. Use it to
adjust for bright sunlight.
Changing the Aperture Setting
There are two aperture settings you can use to match lighting condi-
tions. Use the aperture switch to change the aperture setting.
+
+
–
–
• Use the [●] (F8) setting to decrease expo-
sure. This setting works best outdoors.
NOMAL
• Use the [○] (F2.8) setting to increase ex-
posure. This setting works best indoor and
with back lit images.
MACRO
Note
3. After adjusting the exposure, press the shutter button to
record the image.
• Also see page 28 for information about exposure warning indica-
tors.
25
26
Recording Images
Operation
2. Press the DISP button.
Record Mode Displays
The following provides details on the images, indicators and mes-
sages that appear on the LCD in the Record Mode.
resolution mode
•
Press DISP again to clear the
number of remaining pages
and the resolution mode indica-
tor from the monitor screen.
remaining pages
Image Display
An image of the object that is picked up by the camera’s lens appears
on the LCD. The camera is designed to refresh the image on the LCD
about seven times per second. Because of this, you may experience
a feeling of jerkiness in the changing image if you move the camera
quickly. This is normal and does not indicate malfunction.
Note
• The display/non-display status of the number of remaining pages
and the resolution mode indicator is linked to the page status
indicators(page 33) and the zoom indicator(page 36).
Note
• The LCD image that appears in the Playback Mode is more detailed
than the image produced in the Record Mode. Because of this, you
should consider the Record Mode image to be a reasonable fac-
simile of the image that is actually stored in memory.
Exposure Warning Indicators
Exposure warning indicators appear on the LCD whenever the light
being picked up by the lens would result in under exposure or over
exposure of an image.
Remaining Pages/Resolution Mode Indicator
Pressing DISP in the Record Mode displays a value that shows how
many memory pages are available for recording images, along with
the current resolution mode setting (FINE or NORMAL).
○ ...... Under exposure
● ...... Over exposure
Use the procedure described on page 26 to change the aperture or
change the lighting of the image so the indicator disappears from the
LCD.
1. Enter the Record Mode.
•
Set the function switch to the REC position.
Important!
• The exposure warning indicators also appear when lighting is out-
side the range of the camera. In such a case, changing the aperture
will not clear the indicator from the LCD.
27
28
Recording Images
Operation
• The manual exposure adjustment procedure (page 25) cannot be
used when an exposure warning indicator is on the LCD. Clear the
warning indicator by changing the aperture switch setting.
Using the Self-Timer
With the Self-Timer, the shutter is released 10 seconds after you
press the
1. Enter the Record Mode.
Set the function switch to the REC position.
2. Start the Self-Timer operation.
/PROTECT button.
• Pressing the [+] or [–] button to adjust exposure while an exposure
warning indicator is on the LCD causes a +/– exposure value to
appear. This is an EV value.
•
Low Battery Indicator
•
•
•
Place the camera securely on a tripod, desk or other stable
surface, with the image to be recorded in the LCD.
The low battery indicator (
) appears on the LCD whenever re-
maining battery power drops below a certain level.
After composing the image, press the
ton.
/PROTECT but-
When this indicator appears, replace all four batteries with a fresh set
of new ones. Once the low battery indicator appears, you can expect
only about 10 more minutes (alkaline batteries) of operation before
total power failure.
A 10-second countdown starts on the LCD. The shutter will
release automatically when the end of the countdown is
reached.
• See page 13 for details on how to replace batteries.
•
To cancel on ongoing Self-Timer operation, press the
PROTECT button or shutter button.
/
Memory Full Message
Note
If you are recording images in the Fine Mode and there is not enough
memory for further Fine Mode recording, the message “REMAIN”
appears on the monitor screen along with a value that shows how
many images can still be recorded in the Normal Mode. You can
press MODE at this time to change to the Normal Mode and record
more image if you want.
• If you use the Self-Timer with the lens body rotate 180° (page 22),
you can view the countdown on the LCD while waiting for the shut-
ter to release.
Important!
• If battery power is low, camera power may turn off while a count-
down is in progress. If this happens, replace the batteries with new
ones.
The message “MEMORY FULL” means that there is not enough
memory for further recording in any mode. In this case, you have to
use the following procedures make room in memory for further
recording.
• Delete some images from memory (page 46)
• Change the resolution of some of the stored images from FINE to
NORMAL (page 50)
29
30
Playing Back Images
Operation
This section describes how to recall and view images stored in cam-
era memory.
Notes
• If you set the function switch to PLAY after recording an image, that
image appears on the LCD first.
Displaying Images on the Camera’s LCD
• The message “MEMORY EMPTY” appears on the LCD if there are
no images stored in memory when you enter the Playback Mode.
Camera memory is divided into “pages”, and each image is assigned
to page that is numbered sequentially from 1 through 192 (NORMAL
resolution images). Note that all 192 pages are available only if all
images are recorded using the NORMAL Mode (page 24).
Displaying Images on a TV Screen
Use the special video cable that comes with the camera to connect it
to a television as illustrated below, and you can then view the images
stored in camera memory on the TV’s screen.
The following procedure describes how to display images on the
camera’s built-in LCD.
1. Enter the Playback Mode and turn on the camera.
Important!
•
Slide the function switch to the
PLAY position.
• The camera can be connected only to a TV that is equipped with a
VIDEO IN terminal.
REC
PLAY
•
When power comes on, the page
that was displayed when you last
turned power off appears on the
LCD.
• Make sure that the power of both the camera and the TV are turned
off when making connections.
• The signal output through this camera's VIDEO OUT terminal is an
NTSC signal. An image output through this terminal will not look
normal if the camera is connected to a PAL or other type of TV or
2. Scroll through the memory pages until the image you want
to view is displayed.
video deck.
Accessory video cable
•
•
•
Press [+] to display the next memory page or [–] to display
the previous memory page.
VIDEO OUT
terminal
TV
F
F
R
O
/
E
N
O
W
O
P
L
E
D
IN P U T
To jump to the first (lowest numbered) image in memory,
press the shutter button and [–] button at the same time.
L
R
V ID E O
L
A
M
O
N
A U
D
IO
O
R
C
A
M
Holding down [+] or [–] for about two seconds starts high-
speed scrolling of images.
VIDEO IN terminal
After connecting the camera and TV, set the channel of the TV to the
channel used for video input.
After connecting the camera and TV, use the same procedures as
those described under “Displaying Images on the Camera’s LCD” on
page 31.
31
32
Playing Back Images
Operation
Important!
Producing a Multi-Page Display
• Note that only images already stored in camera memory can be
viewed on the TV screen. If you change to the camera’s Record
Mode, the image picked up by the camera’s lens will not appear on
the TV screen.
Four or nine memory pages can be displayed at the same time. This
feature can be used to display multiple memory pages on the cam-
era's built-in LCD, or on the screen of a connected TV.
Multi-Page Display (EFFECT Menu)
1. Enter the Playback Mode.
Page Status Indicators
Pressing DISP in the Playback Mode causes page status indicators
to appear on the monitor display indicating page number, protect sta-
tus, and resolution mode.
•
Slide the function switch to the PLAY position.
2. Display the EFFECT Menu.
1. Enter the Playback Mode.
•
•
•
Press the EFFECT button to dis-
play the EFFECT Menu.
•
Set the function switch to the PLAY position.
2. Press the DISP button.
resolution mode
page number
At this time either a 4-page or a 9-
page display format appears.
•
The page number and resolution
mode are shown at the top of the
screen. If the page is protected
Note that you cannot use the
multi-page display while protected
memory pages are hidden (page
45).
(page 41), a protect indicator (
)
is shown in the upper left corner.
•
Press DISP again to clear the
page status indicators from the
screen.
3. Specify the screen size.
•
Use the [+] and [–] buttons to specify the screen size.
Note
•
To clear the selection screen and quit this procedure, select
the EXIT icon.
• The display/non-display status of the page status indicators is
linked to the remaining pages and resolution mode indicator (page
27) and to the zoom area indicator (page 36).
4. Press the shutter button.
33
34
Playing Back Images
Operation
5. Scroll through the images.
2. Move the frame to the image you want to select.
•
Use the [+] and [–] buttons to scroll images forward and
back. Each press shows a new screen of four or nine new
images.
•
Use the [+] and [–] buttons to move the frame around the
screen.
3. Press the shutter button.
•
The selected image (the one with
the frame around it) appears on a
single-page display.
1
3
2
4
5
7
6
8
9
10
11
Unused pages are colored gray.
•
To clear the multi-page display and return to the normal sin-
gle-page display, press any button besides [+] or [–].
Using the Zoom Function
This function lets you select a specific part of a stored image and
enlarge it to twice its normal size.
Selecting a Memory Page in a Multi-Page Display
You can use the following procedure to select one of the memory
pages in a multi-page display. Then when you return to the 1-page
display, the memory page you selected will be the one displayed. The
following procedure uses the 4-page display as an example, but you
can use the same procedure with the 9-page display.
1. Enter the Playback Mode.
•
Slide the function switch to the PLAY position.
2. Display the EFFECT Menu.
•
Press the EFFECT button to dis-
play the EFFECT Menu.
1. While a multi-page display (either 4-page or 9-page) is on
the screen, press the DISP button.
•
This causes the image in the up-
per left to be surrounded by a
frame.
3. Select image enlargement.
In this example, we will select this page.
•
Use [+] and [–] to select “ZOOM”.
•
To clear the selection screen and quit this procedure, select
the EXIT icon.
35
36
Playing Back Images
Operation
Notes
4. Press the shutter button.
• If the page number is displayed in the upper right corner of the
screen when you perform a zoom operation, the number is replaced
•
At this time the image is doubled in size. The portion that
appears on the screen is the center of the image.
by a zoom area indicator (
). This indicator shows you what part
of the image is currently enlarged on the display. You can turn the
zoom area indicator on and off by pressing the DISP button.
• Note that turning display of the zoom area indicator on and off dur-
ing a zoom operation also affects the display of the image number
in the Record Mode (page 27), and the memory page number in the
Playback Mode (page 33).
Using Auto Play
Auto play lets you automatically scroll through the camera’s memory
pages quickly and easily. You can specify the speed of the scroll.
5. Scroll the image on the screen.
Use [+] and [–] to scroll as shown in the illustration below.
•
6. To clear the zoomed display and return to the normal size
display, press any button besides [+], [–], or DISP.
Important!
• The camera’s Auto Power Off function (page 16) does not function
while an auto play operation in progress. If you forget to turn the
camera off, there is the danger that auto play will continue until bat-
teries are dead. To avoid this, make sure that you stop the auto play
operation and turn the camera off when you finish viewing.
Changing the Location of the Zoom Area
To start the auto play operation
1. Enter the Playback Mode and turn on the camera.
2. Start the auto play operation.
•
Hold down the [+] and [–] buttons until the message “AUTO
PLAY START” appears.
• Pressing [–] moves the zoom area in the opposite direction.
37
38
Playing Back Images
Operation
2. Press MODE to enter the Auto Play Setting Mode.
•
Be sure to press MODE while an image is stopped on the
monitor, and not while images are changing.
3 seconds
3 seconds
•
Auto play continues to loop through the memory pages. This
means that when it reaches the last page, it starts again
from the first page.
Speed (number of
seconds each
3. Press the shutter button to stop the auto play operation.
image is displayed)
•
Pressing any button except the MODE button stops the auto
play operation.
3. Use [+] (increase) and [–] (decrease) to change the current
speed setting.
•
Note that the buttons of the camera do not operate while a
page change operation is in progress. Make sure that an
image is shown on the display when you press a button to
stop the auto play operation.
•
You can set the speed within a range of 3 to 30 seconds, in
three-second increments.
4. To start auto play using your newly set speed setting,
press the shutter button.
To set auto play speed
•
To exit the auto play setting mode at any time, change the
function switch position to REC and then back to PLAY, or
turn power off. Either of these methods cancels any settings
you made and returns to the settings in effect when you en-
tered the Auto Play Setting Mode.
Use the following procedure to specify how long each image remains
on the display, within the range of 3 to 30 seconds.
1. Perform steps 1 and 2 under “To start the auto play opera-
tion” on page 38 to start auto play.
•
•
You can use auto play in combination with the multi-page
display (page 34). First change to the multi-page format, and
then perform the auto play operation (page 38).
You cannot use auto play in combination with the multi-page
display while protected pages are hidden (page 45).
39
40
Playing Back Images
Operation
5. Display the page you want to protect.
Protecting Memory Pages
•
Use [+] and [–] to scroll through the pages until the one you
want to protect is displayed.
You can protect specific memory pages to ensure that they are not
accidently deleted.
• Note that you cannot protect or unprotect memory pages when pro-
tected memory pages are hidden (page 45).
6. Press the shutter button to protect the displayed image.
A protect indicator ( ) appears in the upper left corner of
the display to indicate it is protected.
7. To protect some more images, repeat steps 5 and 6 above.
•
To protect a single memory page
1. Enter the Playback Mode.
•
To clear the page protect screen, press any button besides
[+], [–], or the shutter button. The page protect screen is also
cleared automatically if you do not perform any button op-
eration for about 20 seconds.
•
Slide the function switch to the PLAY position.
2. Display the PROTECT Menu.
•
•
Press the
to display the PROTECT Menu.
/PROTECT button
To protect all pages in memory
1. Select the Playback Mode and turn on power.
This menu lets you specify either
single-page protection or all-page
protection.
•
Slide the function switch to the PLAY position.
2. Display the PROTECT Menu.
•
•
Press the
to display the PROTECT Menu.
/PROTECT button
3. Select “PAGE”.
This menu lets you specify either
single-page protection or all-page
protection.
•
Use [+] and [–] to select “PAGE”.
•
To clear the selection screen and quit this procedure, select
the EXIT icon.
3. Select “ALL”.
4. Press the shutter button.
•
Use [+] and [–] to select “ALL” and then press the shutter
button.
•
When you select “ALL”, the message “PROTECT ALL?” ap-
pears on the screen.
41
42
Playing Back Images
Operation
4. Specify all-page protection.
5. Press the shutter button to unprotect the displayed image.
•
Use [+] and [–] to select “ALL” and
then press the shutter button.
•
The protect indicator disappears from the upper left corner
of the display to indicate the image is no longer protected.
•
A protect indicator (
) appears
6. To unprotect some more images, repeat steps 4 and 5
above.
in the upper left corner of all
memory pages when you display
the page status indicators.
•
To clear the page protect screen, press any button besides
[+], [–], or the shutter button. The page protect screen is also
cleared automatically if you do not perform any button op-
eration for about 20 seconds.
Unprotecting Memory Pages
You can unprotect specific memory pages or all pages currently
stored in memory.
To unprotect all pages in memory
1. In the Playback Mode, display the PROTECT Menu.
To unprotect a single memory page
•
Press the
Menu.
/PROTECT button to display the PROTECT
1. In the Playback Mode, display the PROTECT Menu.
•
This menu lets you specify either a single page or all pages.
•
Press the
Menu.
/PROTECT button to display the PROTECT
2. Select “ALL”.
•
This menu lets you specify either a single page or all pages.
•
Use [+] and [–] to select “ALL” and then select the shutter
button.
2. Select “PAGE”.
•
When you select “ALL”, the message “PROTECT ALL?” ap-
pears on the screen.
•
Use [+] and [–] to select “PAGE”.
•
To clear the selection screen and quit this procedure, select
the EXIT icon.
3. Specify all-page unprotection.
3. Press the shutter button.
This causes the “PROTECT PAGE” menu to appear.
4. Display the page you want to unprotect.
•
Use [+] and [–] to select “CANCEL” and then press the shut-
ter button.
•
•
The protect indicator will not appear in the upper left corner
of any of the memory pages when you display the page sta-
tus indicators.
•
Use [+] and [–] to scroll through the pages until the one you
want to unprotect is displayed.
43
44
Deleting Memory Pages
Playing Back Images
Use the procedures described in this section to delete memory
pages. You can delete individual pages, or all the pages currently
stored in memory.
Hiding Protected Memory Pages
This function makes it possible for you to hide protected memory
pages so their images do not appear on the monitor during playback.
Warning!
To hide protected memory pages
The delete operation cannot be undone!
While holding down the [+] button, turn on the camera.
Before performing any of the procedures described in this section,
make sure that you really do not need the images recorded on the
memory pages you are deleting. Be especially careful when you are
using the all delete operation.
Important!
• You cannot protect or unprotect pages (pages 41~44) while pro-
tected pages are hidden.
• You cannot display multiple images (page 34) while protected
pages are hidden.
Deleting Images From Memory
• Note that you cannot delete images if they are protected. See page
43 for details on how to unprotect images.
• The message “ALL DATA IS PROTECTED!” appears on the moni-
tor when you hide protected memory pages and all pages currently
in memory are protected. It also appears if you delete all unpro-
tected memory pages while protected memory pages are hidden.
• You cannot delete images from a multi-page display, a display of an
enlarged image, or while Auto Playback is operating.
To unhide protected memory pages
To delete a single image
While holding down the [–] button, turn on the camera.
1. Select the Playback Mode and turn on power.
•
Slide the function switch to the PLAY position.
•
Slide the POWER switch in the direction indicated by the
arrow.
2. Display the DELETE Menu.
•
Press the DEL button to display
the DELETE Menu.
45
46
Deleting Memory Pages
Operation
3. Select “PAGE”.
Note
• Deleting a page causes the remaining pages to be renumbered.
Blank pages are not left inserted between non-blank pages.
•
Use [+] and [–] to select “PAGE”.
•
To clear the selection screen and quit this procedure, select
the EXIT icon.
1
2
3
4
4. Press the shutter button.
5. Use [+] and [–] to display the image you want to delete.
•
Any images that are protected
(page 41) do not appear on the
screen during this operation.
1
2
3
6. Double check to make sure that you really want to delete
the image that is on the screen.
•
To abort the delete operation without deleting anything,
press any button other than [+], [–], or the shutter button.
7. Press the shutter button to delete the page.
•
After you delete an image, the image on the next page ap-
pears on the screen.
8. To delete more images, repeat steps 5 through 7.
•
After you finish deleting all the images you want, press any
button other than [+], [–], or the shutter button to clear the
image delete screen.
47
48
Resolution Conversion
Deleting Memory Pages
Use the following procedure to convert an image converted in the
FINE Mode to a NORMAL Mode image.
To delete all images in memory
1. Enter the Playback Mode.
• After you convert a FINE image to a NORMAL image, the FINE
image is automatically deleted.
•
Slide the function switch to the PLAY position.
2. Display the DELETE Menu.
1. Select the Playback Mode and turn on power.
•
Press the DELETE button to dis-
play the DELETE Menu.
•
Slide the function switch to the PLAY position.
•
Slide the POWER switch in the direction indicated by the
arrow.
2. Display the FINE→NORMAL Menu.
•
Press the MODE button to display
the FINE→NORMAL Menu.
3. Select “ALL”.
Use [+] and [–] to select “ALL” and press the shutter button.
4. Select “ALL”.
•
•
Use [+] and [–] to select “ALL”.
3. Display the image you want to convert.
•
To clear the selection screen and
quit this procedure, select the
EXIT icon.
•
Use [+] and [–] to scroll through the images.
•
Any images that are protected (page 41) do not appear on
the screen during this operation.
4. Press the shutter button to start the conversion.
5. Press the shutter button to delete all images from memory.
5. After the conversion is complete, you can repeat steps 3
and 4 to convert more images.
•
After all images are deleted, the message “MEMORY
EMPTY” appears on the screen.
•
After you are finished converting images, press any button
besides [+], [–], or the shutter button to clear the conversion
screen.
•
If you perform the above operation while protected images
are hidden, the message “ALL DATA IS PROTECTED!” ap-
pears on the screen.
49
50
Connecting to Other Devices
The camera terminals
The following describes which the camera terminal you should use
for each type of connection.
UsingtheCamerawithaConnected Device
The following section provides specific information on how you can
use the camera after connecting to various types of devices. In each
case, the camera terminal you should connect to is indicated in the
VIDEO
DIGITAL
title as
and
.
VIDEO OUT – Use this terminal when connecting to the VIDEO IN
terminal of a TV, video tape deck, video printer, or
other similar devices. Use the special video cable
that comes with the camera for such connections.
Important!
• Make sure that the power of all devices is turned off before connect-
ing them.
INPUT
• You should also check the owner’s manuals of the device you are
connecting to the camera for precautions and other information.
VIDEO OUT
L
R
VIDEO
AUDIO
terminal
F
F
R
/ O
E
N
W
O
O
P
L
E
D
Special video
cable that
comes with
camera
VIDEO
Television
VIDEO IN
L
A
M
O
N
terminal of other
device
• See page 32 of this manual for details about connecting to a televi-
sion and displaying images from camera memory on a TV screen.
O
R
C
A
M
DIGITAL – Use this terminal to connect to a personal computer (re-
quires optional Connection Kit), another CASIO Digital
Camera, or a QV Color Printer. The illustration below
shows how to connect to another digital camera.
VIDEO
Video Tape Deck
You can use the video tape deck to record images from the camera.
To record camera images on video tape
DIGITAL terminal
DIGITAL terminal*
1. Use the special video cable that comes with the camera to connect
to the VIDEO IN terminal of the video tape deck.
Connecting
cable*
F
F
F
F
R
/ O
R
/ O
E
N
E
N
O
W
O
W
O
O
P
P
2. Set up the video tape deck to record images input through its
VIDEO IN terminal.
L
L
E
E
D
D
L
L
A
A
M
O
M
O
N
N
• Consult the owner’s guide that comes with the tape deck for details
about how to set up for recording.
O
O
R
C
R
C
A
A
M
M
3. Enter the camera Playback Mode and start the video deck record
operation.
* The type of connecting cable you should use depends on the type
and shape of the terminals equipped on the digital camera you are
connecting to. See pages 52 through 58 for details.
• It is probably best to use auto play when recording camera images
to video tape, because it changes pages automatically at a preset
speed.
51
52
Using the Camera with a Connected Device
Using the Camera with a Connected Device
• Remaining pages (page 27) are also recorded on the video tape if
they are turned on. Be sure to turn off display of remaining pages if
you do not want them in the taped images.
Connecting to another CASIO Digital Camera
DIGITAL
You can connect the camera to another CASIO digital camera and
exchange image data between them. Connect the DIGITAL terminals
of the two cameras using the optionally available SB-62 connecting
cable.
• If the low battery indicator (page 29) is displayed while you are re-
cording to video tape, it will also be recorded with the image. If this
happens, either replace batteries or use the AC adaptor.
To connect the two cameras
VIDEO
Video Printer
1. Turn both cameras off.
You can use Video Printer to print copies of images in camera
memory.
2. Connect the two cameras by plugging the optional SB-62 connec-
tion cable into their DIGITAL terminals.
3. Turn both cameras on.
To print camera images on a Video Printer
1. Use the special video cable that comes with the camera to connect
to the VIDEO IN terminal of the video printer.
To send data from this camera to another camera
1. Set the function switches of both cameras to PLAY.
2. Set up the video printer to print images input through its VIDEO IN
terminal.
2. Use the [+] and [–] buttons of this camera to find the image you
want to send.
• Consult the owner’s guide that comes with the video printer for de-
tails about how to set up for printing.
• You cannot send images between two cameras while either of their
function switches is set to REC.
3. Enter the camera Playback Mode and display the image you want
to print.
• You cannot send images while using the multi-page display or
zoom function.
4. Start the video printer’s print operation.
3. Press the shutter button of this camera.
• Remaining pages (page 27) are also included on the print if they are
turned on. Be sure to turn off display of remaining pages if you do
not want them in the print.
• If the low battery indicator (page 29) is displayed while you are print-
ing, it will also be printed with the image. If this happens, either re-
place batteries or use the AC adaptor.
Return to previous display
Receive icon
Send icon
53
54
Using the Camera with a Connected Device
Using the Camera with a Connected Device
4. Use the [+] and [–] buttons to move the pointer to the send icon.
4. Use the [+] and [–] buttons to move the pointer to the receive icon.
5. After you make the setting you want, press the shutter button
again.
• As soon as you perform the above step, all of the buttons and con-
trols on the other camera become disabled.
• Pressing the shutter button sends the selected image to the other
camera.
5. After you make the setting you want, press the shutter button
again.
• You can send only one image at a time. To send more images,
repeat steps 2 through 5.
• Pressing the shutter button receives the selected image from the
other camera.
To receive data to this camera from another camera
* You can receive only one image at a time. To send more images,
repeat steps 2 through 5.
1. Set the function switches of both cameras to PLAY.
2. Use the [+] and [–] buttons of other camera to find the image you
want to receive.
Important!
Never disconnect the cable, turn power off, or change the function
switch setting while a data communication operation is in progress.
Doing so can damage the camera.
• You cannot receive images between two cameras while either of
their function switches is set to REC.
• You cannot receive multi-page display or zoomed images.
• If you try to receive a multi-page display or zoomed images, other
camera’s monitor automatically changes to normal display of page
1.
How data transfer affects resolution
• QV-100
QV-100...... FINE
NORMAL
FINE
NORMAL
3. Press the shutter button of this camera.
• QV-100 → QV-10/QV-10A/QV-11/QV-30..... FINE → NORMAL
NORMAL → NORMAL
• QV-100 ← QV-10/QV-10A/QV-11/QV-30..... NORMAL ← NORMAL
Return to previous display
Receive icon
Send icon
55
56
Using the Camera with a Connected Device
Using the Camera with a Connected Device
VIDEO
Using QV-Link Software and a Connection Cable
Computer (Video Capture)
The optionally available QV-Link Software and connection cable
lets you transfer images from your digital camera to a personal
computer. The following are the models of QV-Link software that
support this camera.
You can use the special video cable that comes with the camera to
connect directly to the VIDEO IN terminal of a personal computer
equipped with video capture capabilities.
To transfer camera images to a personal computer (video
capture)
Windows Version: LK-10V
Macintosh Version: LK-2V
1. Use the special video cable that comes with the camera to connect
to the VIDEO IN terminal of the computer.
Important!
2. Enter the camera Playback Mode and display the image you want
to send.
• This camera does not fully support the software that comes with the
LK-1 and LK-1A connection kits for Windows, and the LK-2 and LK-
2A connection kits for the Macintosh. Never try to use the software
that comes with these connections kits with this digital camera.
3. Perform the required operation on the computer.
• Consult the owner’s guide that comes with the computer or its video
capture board for details about how to set up to capture images.
DIGITAL
Connecting to a QV color Printer
Important!
You can connect this camera to a CASIO QV color Printer and print-
out images that are in camera memory. Use the communication cable
that comes with the QV Color Printer to connect camera's DIGITAL
terminal to the QV Color Printer's terminal.
• With this configuration, you cannot send images from the personal
computer to the camera.
• The camera can be connected directly to a personal computer or
video capture board that is equipped with a VIDEO IN terminal
(RCA pin jack). It cannot be connected directly to an S-VIDEO ter-
minal.
Applicable printer model: CASIO QG-100
After connecting the two units, turn on camera power and slide the
function switch to the PLAY position. For details on how to perform
the QV Color Printer procedures required for printing, see the docu-
mentation that comes with the QV Color Printer.
57
58
Troubleshooting
Reference
Symptom
Probable Cause
Action
Sympton
Probable Cause
Action
No power
1. Batteries not loaded 1. Correctly load batter-
Poor LCD image Incorrect NORMAL/ Use NORMAL for scen-
correctly.
2. Dead batteries
ies (page 13).
focus
MACRO switch setting ery and group photos,
and MACRO for close-
2. Replace batteries with
new ones (page 13).
3. Use only recom-
mended AC adaptor .
ups (page 24).
3. Wrong AC adaptor
Poor color and Indoor fluorescent lighting Shoot under incandes-
brightness when
indoors
cent or other non-fluores-
cent lighting (page 21).
Sudden power 1. Operation of Auto 1. Turn power back on.
failure
Power Off
2. Low battery power
Use of manganese
batteries.
2. Replace batteries with
new ones (page 13).
Replace manganese
batteries with alkaline
batteries.
Recorded image Strong direct or reflected Change aperture setting
has greenish sunlight
tinge.
to [●]. Note that this con-
dition is due to CCD char-
acteristics, and does not
indicate camera malfunc-
tion.
indicator Low battery power
on LCD
Replace batteries (page
13).
Color of
1. Reflection from sun- 1. Reorient the camera
recorded image
is strange.
light or light from an-
other source
so that light is not shin-
ing directly into lens.
No recording Function switch sets to Set function switch to
when shutter PLAY.
REC.
2. Difference between 2. This difference does
b u t t o n
pressed
i s
Record Mode and
Playback Mode char-
acteristics.
not indicate a problem
or malfunction.
Power failure Low battery power
during self-timer
Replace batteries (page
13).
No +/– button Button operation during Wait until an image is on
operation
operation during page change
multi-page dis-
play
the LCD before perform-
ing a button operation.
● indicator on Over exposure
Change aperture switch
LCD
setting to [●] (page 26).
All pages do not Protected memory pages Unhide protected memo-
○ indicator on Under exposure
LCD
Change aperture switch
setting to [○] (page 26).
appear during are hidden.
auto play.
ry pages (page 45).
59
60
Troubleshooting
Action
Reference
Sympton
Delete opera- 1. All pages are pro- 1. Unprotect the page
Sympton
Probable Cause
Probable Cause
Action
Camera is con- 1. Function switch set to 1. Set function switch to
nected to a TV, REC PLAY (page 31).
but LCD monitor 2. Incorrect camera-TV 2. Connect correctly us-
tion does not
start when DEL
is pressed.
tected.
you want to delete
(page 43).
2. Multi-page display 2. Change to a normal-
contents do not
appear on TV
screen.
connection
ing the special video
cable that comes with
the camera (page 32).
3. Set up the TV cor-
rectly.
(page 34) or zoom dis-
play (page 36)
size, 1-page display
format.
3. Wrong TV set up
All buttons and Malfunction due to static Remove batteries and
switches do not electrical charge or strong disconnect the AC adap-
operate.
impact
tor if you are using one.
Restore power and turn
the camera on. If this
does not work, contact
your dealer or an author-
ized CASIO service pro-
vider.
Some images Protected memory pages Unhide protected memo-
are missing.
are hidden.
ry pages by holding down
[–] while turning power on
(page 45).
C a n n o t u s e Protected memory pages Unhide protected memo-
multi-page dis- are hidden.
play.
ry pages by holding down
[–] while turning power on
(page 45).
Very bright or Wrong BRIGHT setting
very dark LCD
image.
Adjust the BRIGHT set-
ting (page 11).
Cannot protect Protected memory pages Unhide protected memo-
No buttons or Malfunction due to expos- Remove batteries and/or
switches oper- ing camera to electro- unplug the AC adaptor.
memory pages. are hidden.
ry pages by holding down
[–] while turning power on
(page 45).
ate.
static charge.
Reload batteries and/or
plug in AC adaptor and try
operation again.
ALL DATA IS Protected memory pages Unhide protected memo-
PROTECTED! are hidden.
stays on monitor
and images do
ry pages by holding down
[–] while turning power on
(page 45).
LCD monitor is Incorrect BRIGHT setting Adjust the BRIGHT
too bright or too
dark.
(brightness) setting.
not appear.
C a n n o t e x - 1. Incorrect cable con- 1. Connect correctly
change data be- nection (page 51).
tween two cam- 2. Camera connected to 2. Turn power on after
eras
is not turned on.
3. Function switch sets to 3. Set function switch to
REC. PLAY (page 31).
connecting cable.
61
62
Troubleshooting
Action
Reference
Messages
Sympton
Probable Cause
Pressing MODE There are no convertible
does not change images in memory.
t h e F I N E →
Camera is set up to hide protected images, and all
images are protected.
ALL DATA IS
PROTECTED
NORMAL Menu.
ERROR
REMAIN
Error during data communication. Check cable con-
nections and mode settings.
Cannot transfer 1. Sending camera’s 1. Correct the situation
d a t a ( e r r o r memory is empty. and try again.
keeps occurring) 2. Receiving camera’s 2. Correct the situation
memory is full and try again.
3. Receiving camera’s 3. C h a n g e f u n c t i o n
No more memory for FINE images. Use MODE to
change to NORMAL Mode, delete some images, or
change resolution of existing images from FINE to
NORMAL.
function switch is in
REC position.
switch setting of re-
ceiving camera to
PLAY (page 31).
MEMORY FULL
Not enough memory for further recording. Delete
some images from memory or change resolution of
stored images from FINE to NORMAL.
4. The message “ALL 4. The sending camera’s
DATA IS PROTECT-
ED” is on the monitor
of the sending camera.
protected memory
pages are hidden. Un-
hide protected memory
pages by holding down
[–] while turning power
on (page 45).
MEMORY EMPTY
No images are stored in memory.
Problem with internal memory. Contact your dealer or
an authorized CASIO service provider.
MEMORY ERROR
#1~#3
CONSULT THE
OWNER’S MANUAL!
5. Low battery (indicated 5. Replace batteries or
by
)
use the AC adaptor
(page 13).
6. Disconnection of cable 6. Securely reconnect the
during data communi-
cation
cable.
Keys of con- Connected camera op- Normal operation will re-
nected camera eration is disabled during turn when you exit data
are disabled.
data communications.
communications by press-
ing EXIT.
63
64
Specifications
Reference
Battery Life .......... LR6 (AM3) AA-size alkaline batteries
Approximately 150 minutes continuous operation
Recording for about 96 images (one image per minute)
FR6 AA-size lithium batteries
General
Recording System ...... Digital (JPEG based)/Field recording
Signal System ............ NTSC
Approximately 240 minutes continuous operation
Recording for about 180 images (one image per
minute)
Recording Medium ..... Built-in 32-Mbit flash memory
Number of Memory Pages
FINE(VGA) ............... 64 (approximately 480-kbit compressed)
NORMAL(Q-VGA) .... 192 (approximately 160-kbit compressed)
Dimensions ......... 66(H) X 139(W) X 40(D)mm /
2.6" (H) X 5.5" (W) X 1.6" (D)
Delete Functions ........ Single page; All pages (with page protect feature)
Imaging Device .......... 1/4-inch CCD (Total Number of Pixels: 360,000)
Lens ........................... Fixed focus with macro position; F2.8/f = 4.2mm
Aperture ..................... F2.8/F8 manual switching
Weight ................. Approximately 180g / 6.3oz (excluding batteries)
Accessories......... Wrist strap; soft case; special video cable; Alkaline
batteries (LR6 X 4); cleaning cloth; owner’s manual
Focal Length .............. F2.8/NORMAL : 0.5 meters to ∞
F2.8/MACRO : 14cm to 18cm
• The liquid crystal panel built into this camera is the product of preci-
sion engineering, with an effective pixel rate of 99.99%. This also
means, however that 0.01% of the pixels can be expected to fail to
light or to remain lit at all times.
F8/NORMAL : 0.3 meters to ∞
F8/MACRO
: 11cm to 27cm
(from lens protection filter)
Light Metering ............ TTL center point by photographic element
Exposure Metering ..... Aperture priority AE
Exposure Range ........ EV +5 to 18
About the camera’s backlight…
Exposure Adjustment ..... -2EV to +2EV
• The camera is equipped with a fluorescent light source to provide
the back lighting for its LCD.
Shutter System .......... Electronic
Shutter Speed ............ 1/8 to 1/4000 second
White Balance ............ Automatic
• The normal service life of the backlight is approximately six years,
when the camera is used for about two hours a day.
Self-timer .................... 10-second
• Should the LCD image appear abnormally dark, take the camera to
your dealer or an authorized CASIO service provider to have the
light source replaced. Note that you will be charged for this replace-
ment.
Monitor ....................... 61,380-pixel 1.8-inch TFT low-glare color LCD;
doubles as finder
Terminals ................... DIGITAL; VIDEO OUT; DC IN 6V
• Under very cold conditions, the backlight may require more time
than normal to light, or reddish bands may appear in the image.
These conditions do not indicate malfunction, and normal operation
should return at higher temperatures.
Power Supply ............. Batteries (AA-size Alkaline or lithium batteries X
4)/AC Adaptor (AD-C60)
65
66
|